- Contact Us：
-
+86-028-85255257
- sales@f-tone.com
其它產品
標準協議光模塊
- 全國產化光模塊
- 25G~400G高速光模塊
- 200km超長距光模塊
- 5G移動通信光模塊
- SFP光模塊
- CWDM SFP
- DWDM SFP
- BIDI-SFP
- SGMII SFP
- Video SFP光模塊
- Copper SFP
- 低功耗SFP
- SFP+光模塊
- CWDM SFP+
- DWDM SFP+
- BIDI SFP+
- Tunable SFP+
- 16GFC SFP+
- 25GE SFP+
- 32GFC SFP+
- SFP28光模塊
- SFP56光模塊
- SFP-DD光模塊
- QSFP光模塊
- QSFP+ 光模塊
- QSFP28光模塊
- QSFP56光模塊
- QSFP112 400G光模塊
- QSFP224光模塊
- QSFP-DD光模塊
- QSFP-DD800光模塊
- OSFP 400Gbps
- OSFP 800G光模塊
- OSFP 1.6T光模塊
- HSFP 1.6T~12.8T光模塊
- XFP光模塊
- CWDM XFP
- DWDM XFP
- BIDI XFP
- 1x9光模塊
- CSFP光模塊
- CSFP+10G光模塊
- CXP光模塊
- CFP光模塊
- CFP2光模塊
- CFP4光模塊
- CFP8 400Gbps
- CDFP 400Gbps
- MicroQSFP光模塊
- DSFP光模塊
- FT-61光模塊
- OLT光模塊
- ONU光模塊
- PLCC光模塊
- RJ光模塊
- SFF光模塊
- SNAP12光模塊
- USOT光模塊
- X2光模塊
- Xenpak光模塊
- 光電編碼器模塊
- 光模塊測試板
- 光模塊籠子座子
- DAC 高速線纜
- 光纖滑環|光電滑環
- 光纜車
- 軍品級DIN光模塊
- 塑料光纖模塊
- 替換安華高工業電力光模塊
- 兼容國產化替換安華高光耦
- 射頻光模塊
- 微型多路光模塊
- 特種光模塊
- 特種光纖連接器
- 特種光電連接器
- USB光纖延長線
- HDMI
- 特種電連接器
- 特種光纖光纜
- 光藕
- SMA測試線纜
- OSA
- PON BOSA
- Pigtailed PD
- RFoG BOSA
- TO-CAN
- 光纖溫度傳感器
- 光纖應變傳感器
- 光纖加速度傳感器
- 光線壓力傳感器
- 光纖位移傳感器
- 光纖應力傳感器
- 光纖傳感分析儀
- 光纖分布式測溫主機
- 光纖布里淵信號解調儀
- 分布式光纖聲振信號解調儀
- Camera Link
技術支持
兼容協議光模塊
- 華為光模塊
- 思科光模塊
- 華三光模塊
- 中航光電光模塊
- 中興光模塊
- 銳捷光模塊
- 惠普光模塊
- 神州數碼光模塊
- Juniper光模塊
- Extreme光模塊
- Brocade光模塊
- D-Link光模塊
- 赫思曼光模塊
- 阿爾卡特朗訊光模塊
- Allied Telesis光模塊
- Foundry光模塊
- Force10光模塊
- Blade光模塊
- Linksys光模塊
- Marconi光模塊
- 博達光模塊
- 網件光模塊
- Nortel光模塊
- Moxa光模塊
- ?？低旽IKVISION光模塊
- McAfee光模塊
- SMC智邦光模塊
- 安華高Avago光模塊
- 飛通光模塊
- Finisar光模塊
- yellobrik SDI光模塊
- 羅克韋爾AB光模塊
- 羅杰康光模塊
- 研華Advantech光模塊
其它種類光器件
- 全國產化光器件
- 光纖陣列系列
- 高速模塊微連接
- 相干通訊光連接
- 硅光子器件光鏈接
- Bio-Medical Equipment
- Components for Fiber Laser
- Components for Fiber sensing
- Components for Optical Network
- EDFA光纖放大器
- 光纖傳感器
- High power Component
- Hybrid for EDFA
- Test Equipment & Others
- Test Equipment & Others
- 保偏光器件
- 光分路器
- 光開關
- 探測器
- 光功率計
- 全光纖相位拉伸器
- 光纖準直器
- 光衰減器系列
- 光偏振控制器
- 光源
- 光環行器Circulator
- 光纖延遲線
- 色散補償模塊
- 光纖放大器
- 無源傳輸轉換器
- 光纖激光器
- 光調制器
- 光電探測器
- 光纖偏振
- 光纖濾波器
- 同軸激光器
- 同軸電纜
- 光纖法蘭適配器
- 光纖跳線&尾纖
- SMA-特殊纖芯系列
- 特殊接頭系列
- 鎧裝系列
- 光耦合器Coupler
- 皮纖跳線系列
- 大芯數系列
- 回路跳線系列
- 保偏光纖系列
- 光通信組件
- 光隔離器isolator
- 其它光器件
- 可調濾波器
- 可調衰減器
- 拉錐耦合器
- 無源光器件
- 法拉第旋轉鏡
- 波分復用器
- 濾波器
- 蝶形激光器
- 光耦合器&分路器
- 光纖環形器&法拉第旋轉鏡
- 光纖隔離器&波分復用器
- 光纖分束器&合束器（PBS/PBC）
- 光纖光柵
- 高速線纜
FT SteadiBeam 200 Isolator
Description
FT SteadiBeam 200 Isolator
FT SteadiBeam is the best Isolator designed for high power pulse fiber lasers. Two versions of design are compatible to lasers of 100W and 200W, respectively. With multiple patented technologies, the SteadiBeam delivers unparalleled performance of aberration-free and thermal lensing-free beam quality at any output power level. It also provides high isolation to reflection coming from all spatcial angles.
| Specifications | ||
| Parameter | Unit | Value |
| Center Wavelength (λc) | nm | 1064±15nm |
| Max. Insertion Loss at 30℃,λc | dB | 0.4 |
| Typ. Peak Isolation | dB | 40 |
| Min. All-angle Isolation at 30℃ | dB | 30 |
| Min. All-angle Isolation at full temperature | dB | 20 |
| Min. Return Loss | dB | 50 |
| Nominal Output Beam Diameter (1/e^2) | mm | 6.5 ± 0.5 |
| Beam Diameter Change with Power | μm/W | <3 |
| Beam Circularity | % | > 90 |
| M2 Degradation | % | < 10 |
| Max. Average Optical Power | W | 200 |
| Max. Peak Power for ns pulse | KW | 30 |
| Reverse Power Handling | W | 10W Continuous |
| 50W (3 min max) | ||
| Fiber Types | Specified by ordering info | |
| Operating Temperature | ℃ | 10 to +50 |
| Storage Temperature (Non-condensing condition) | ℃ | -10 to +60 |
| Specifications | ||
| Parameter | Unit | Value |
| Center Wavelength (λc) | nm | 1064±15nm |
| Max. Insertion Loss at 30℃,λc | dB | 0.4 |
| Typ. Peak Isolation | dB | 40 |
| Min. All-angle Isolation at 30℃ | dB | 30 |
| Min. All-angle Isolation at full temperature | dB | 20 |
| Min. Return Loss | dB | 50 |
| Nominal Output Beam Diameter (1/e^2) | mm | 6.5 ± 0.5 |
| Beam Diameter Change with Power | μm/W | <3 |
| Beam Circularity | % | > 90 |
| M2 Degradation | % | < 10 |
| Max. Average Optical Power | W | 200 |
| Max. Peak Power for ns pulse | KW | 30 |
| Reverse Power Handling | W | 10W Continuous |
| 50W (3 min max) | ||
| Fiber Types | Specified by ordering info | |
| Operating Temperature | ℃ | 10 to +50 |
| Storage Temperature (Non-condensing condition) | ℃ | -10 to +60 |
| Specifications | ||
| Parameter | Unit | Value |
| Center Wavelength (λc) | nm | 1064±15nm |
| Max. Insertion Loss at 30℃,λc | dB | 0.4 |
| Typ. Peak Isolation | dB | 40 |
| Min. All-angle Isolation at 30℃ | dB | 30 |
| Min. All-angle Isolation at full temperature | dB | 20 |
| Min. Return Loss | dB | 50 |
| Nominal Output Beam Diameter (1/e^2) | mm | 6.5 ± 0.5 |
| Beam Diameter Change with Power | μm/W | <3 |
| Beam Circularity | % | > 90 |
| M2 Degradation | % | < 10 |
| Max. Average Optical Power | W | 200 |
| Max. Peak Power for ns pulse | KW | 30 |
| Reverse Power Handling | W | 10W Continuous |
| 50W (3 min max) | ||
| Fiber Types | Specified by ordering info | |
| Operating Temperature | ℃ | 10 to +50 |
| Storage Temperature (Non-condensing condition) | ℃ | -10 to +60 |
Related Products
FT PM Patchcord (488, 532, 635)
FT PM Patchcord (488, 532, 635)
The PM Patchcord series has excellent environmental stability, high return loss, and low insertion loss. It is ideal for PM amplifiers, fiber lasers, and test instrumentation applications.
FT 2000nm & 793nm (2+1)×1 Multimode Pump & Signal Combiner, 2.0μm Fiber Laser
FT 2000nm & 793nm (2+1)×1 Multimode Pump & Signal Combiner, 2.0μm Fiber Laser
|
Features |
Applications |
Description |
|
●High power transfer efficiency |
●High power fiber laser |
●Pump combiner + signal transfers |
|
●Wavelength insensitive |
●High power EDFA |
|
|
●Particular pulling and package technique |
●CATV amplifier |
|
|
●Custom configurations available |
FT RG PM Fused Combiner
FT RG PM Fused Combiner
The Polarization Maintaining Fused RG Combiner is manufactured by using advanced technology and polarization maintaining fiber to enable the red and green light to be combined. They offer low excess loss, small size, high extinction ratio, high return loss, and excellent environmental stability.
FT RG, RB, GB Combiner (635/532, 635/488, 532/488)
FT RG, RB, GB Combiner (635/532, 635/488, 532/488)
The RG, RB, GB Combiner enable any two primary colors in the visible wavelength region to be combined. They offer very low insertion loss and excellent environmental stability.
FT RGB Combiner (488/532/635)
FT RGB Combiner (488/532/635)
The Red, Green, Blue Combiner enable three primary colors in the visible wavelength region to be combined. They offer very low insertion loss and excellent environmental stability.
FT RGB PM Combiner (488/532/635)
FT RGB PM Combiner (488/532/635)
The PM RGB Combiner enable three primary colors in the visible wavelength region to be combined. The components are based on environmentally stable thin film filter technology and are characterized with high extinction ratio, low insertion loss, and high return loss.