- Contact Us：
-
+86-028-85255257
- sales@f-tone.com
其它產品
標準協議光模塊
- 全國產化光模塊
- 25G~400G高速光模塊
- 200km超長距光模塊
- 5G移動通信光模塊
- SFP光模塊
- CWDM SFP
- DWDM SFP
- BIDI-SFP
- SGMII SFP
- Video SFP光模塊
- Copper SFP
- 低功耗SFP
- SFP+光模塊
- CWDM SFP+
- DWDM SFP+
- BIDI SFP+
- Tunable SFP+
- 16GFC SFP+
- 25GE SFP+
- 32GFC SFP+
- SFP28光模塊
- SFP56光模塊
- SFP-DD光模塊
- QSFP光模塊
- QSFP+ 光模塊
- QSFP28光模塊
- QSFP56光模塊
- QSFP112 400G光模塊
- QSFP224光模塊
- QSFP-DD光模塊
- QSFP-DD800光模塊
- OSFP 400Gbps
- OSFP 800G光模塊
- OSFP 1.6T光模塊
- HSFP 1.6T~12.8T光模塊
- XFP光模塊
- CWDM XFP
- DWDM XFP
- BIDI XFP
- 1x9光模塊
- CSFP光模塊
- CSFP+10G光模塊
- CXP光模塊
- CFP光模塊
- CFP2光模塊
- CFP4光模塊
- CFP8 400Gbps
- CDFP 400Gbps
- MicroQSFP光模塊
- DSFP光模塊
- FT-61光模塊
- OLT光模塊
- ONU光模塊
- PLCC光模塊
- RJ光模塊
- SFF光模塊
- SNAP12光模塊
- USOT光模塊
- X2光模塊
- Xenpak光模塊
- 光電編碼器模塊
- 光模塊測試板
- 光模塊籠子座子
- DAC 高速線纜
- 光纖滑環|光電滑環
- 光纜車
- 軍品級DIN光模塊
- 塑料光纖模塊
- 替換安華高工業電力光模塊
- 兼容國產化替換安華高光耦
- 射頻光模塊
- 微型多路光模塊
- 特種光模塊
- 特種光纖連接器
- 特種光電連接器
- USB光纖延長線
- HDMI
- 特種電連接器
- 特種光纖光纜
- 光藕
- SMA測試線纜
- OSA
- PON BOSA
- Pigtailed PD
- RFoG BOSA
- TO-CAN
- 光纖溫度傳感器
- 光纖應變傳感器
- 光纖加速度傳感器
- 光線壓力傳感器
- 光纖位移傳感器
- 光纖應力傳感器
- 光纖傳感分析儀
- 光纖分布式測溫主機
- 光纖布里淵信號解調儀
- 分布式光纖聲振信號解調儀
- Camera Link
技術支持
兼容協議光模塊
- 華為光模塊
- 思科光模塊
- 華三光模塊
- 中航光電光模塊
- 中興光模塊
- 銳捷光模塊
- 惠普光模塊
- 神州數碼光模塊
- Juniper光模塊
- Extreme光模塊
- Brocade光模塊
- D-Link光模塊
- 赫思曼光模塊
- 阿爾卡特朗訊光模塊
- Allied Telesis光模塊
- Foundry光模塊
- Force10光模塊
- Blade光模塊
- Linksys光模塊
- Marconi光模塊
- 博達光模塊
- 網件光模塊
- Nortel光模塊
- Moxa光模塊
- ?？低旽IKVISION光模塊
- McAfee光模塊
- SMC智邦光模塊
- 安華高Avago光模塊
- 飛通光模塊
- Finisar光模塊
- yellobrik SDI光模塊
- 羅克韋爾AB光模塊
- 羅杰康光模塊
- 研華Advantech光模塊
其它種類光器件
- 全國產化光器件
- 光纖陣列系列
- 高速模塊微連接
- 相干通訊光連接
- 硅光子器件光鏈接
- Bio-Medical Equipment
- Components for Fiber Laser
- Components for Fiber sensing
- Components for Optical Network
- EDFA光纖放大器
- 光纖傳感器
- High power Component
- Hybrid for EDFA
- Test Equipment & Others
- Test Equipment & Others
- 保偏光器件
- 光分路器
- 光開關
- 探測器
- 光功率計
- 全光纖相位拉伸器
- 光纖準直器
- 光衰減器系列
- 光偏振控制器
- 光源
- 光環行器Circulator
- 光纖延遲線
- 色散補償模塊
- 光纖放大器
- 無源傳輸轉換器
- 光纖激光器
- 光調制器
- 光電探測器
- 光纖偏振
- 光纖濾波器
- 同軸激光器
- 同軸電纜
- 光纖法蘭適配器
- 光纖跳線&尾纖
- SMA-特殊纖芯系列
- 特殊接頭系列
- 鎧裝系列
- 光耦合器Coupler
- 皮纖跳線系列
- 大芯數系列
- 回路跳線系列
- 保偏光纖系列
- 光通信組件
- 光隔離器isolator
- 其它光器件
- 可調濾波器
- 可調衰減器
- 拉錐耦合器
- 無源光器件
- 法拉第旋轉鏡
- 波分復用器
- 濾波器
- 蝶形激光器
- 光耦合器&分路器
- 光纖環形器&法拉第旋轉鏡
- 光纖隔離器&波分復用器
- 光纖分束器&合束器（PBS/PBC）
- 光纖光柵
- 高速線纜
Unidirectional Integrated Tap Photodiode (UTPD)
Description
Unidirectional Integrated Tap Photodiode (UTPD)
The Unidirectional Integrated Tap Photodiode (UTPD) integrates the functionality of an optical coupler and a photodiode for optical network's power monitoring. The unidirectional feature allows the PD to respond power from input port only. It can be applied for channel power monitoring in DWDM system, optical fiber line auto switch protection equipment (OLP), re-configurable optical add/drop multiplexer (OADM), and gain/attenuation monitoring in EDFA, etc.
|
Specifications |
||
|
Parameter |
Unit |
Value |
|
Operating Wavelength Range (λop) |
nm |
1528 - 1567 |
|
Max. Insertion Loss 1% |
dB |
0.3 |
| 2% | dB |
0.4 |
| 5% | dB |
0.5 |
|
10% |
dB | 0.9 |
|
50% |
dB | 3.5 |
|
Max Wavelength Dependent Loss |
dB |
0.2 |
|
Max. Polarization Dependent Loss |
dB |
0.05 |
|
Min. Return Loss |
dB |
45 |
|
Responsivity 1% |
mA/W |
7 - 15 |
| 2% | mA/W |
14 - 25 |
| 5% | mA/W |
35 - 65 |
|
10% |
mA/W | 75-120 |
|
50% |
mA/W | 392-570 |
|
Min. Directivity From Output to PD** |
dB |
25 |
|
Max. Wavelength Dependent Responsivity*** |
dB |
+/-0.4 |
|
Max. Dark Current (@70 ℃, -5 V bias) |
nA | 2 |
|
Max. Optical Power 1% |
mW |
1000 |
|
2% |
mW | 500 |
|
5% |
mW | 200 |
|
10% |
mW | 100 |
|
50% |
mW | 20 |
|
Max. Power on PD Chip |
mW |
10 |
|
Max. Linearity Optical Power from -40dBm to +10 dBm on PD (-5V bias) |
% |
5 |
|
Fiber Type |
SMF-28 Ultra Fiber |
|
|
Operating Temperature |
℃ |
-5 to +75 |
| Storage Temperature | ℃ | -40 to+85 |
| Soldering Tempeature (Over 2mm from Head, Less than 5s) | ℃ | ≤ 260 |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
3/10W 1064nm PM Circulator, CW or Pulsed, 1.0 μm Fiber Laser
3/10W 1064nm PM Circulator, CW or Pulsed, 1.0 μm Fiber Laser
The High Power Polarization Maintaining Circulator is characterized with low insertion loss, high isolation, high power handling, high return loss, and high extinction ratio. It is ideal for fiber laser and instrumentation applications.
2W 1064nm Isolator, CW or Pulsed
2W 1064nm Isolator, CW or Pulsed
The 1064nm High Power Polarization Insensitive Isolator is characterized with low insertion loss, high isolation, high power handling, high return loss, excellent environmental stability and reliability. It is ideal for fiber laser and instrumentation applications.
Dense Wavelength Division Multiplexers Module (4/8/16 Channels) (DWDMM Series)
Dense Wavelength Division Multiplexers Module (4/8/16 Channels) (DWDMM Series)
The multi-channel Dense Wavelength Division Multiplexer Module is based on thin film DWDM devices by cascading individual channels into sequence. Channel numbers can be as high as 40 (16) for 100 (200) GHz systems in C band or in L band. They are featured with wide passband, low insertion loss, high channel isolation and high environmental stability. They can be used in dense WDM systems to perform mutiplexing or demutiplexing function.
Coarse Wavelength Division Multiplexers Module (4 Channels/8 Channels) (CWDMM Series)
Coarse Wavelength Division Multiplexers Module (4 Channels/8 Channels) (CWDMM Series)
The Coarse WDM Module is expanding the bandwidth of Metro/Access Networks. The 4 channel and 8 channel CWDM modules are based on Coarse Wavelength Division Multiplexer devices. They can act as MUX/DEMUX with 20 nm channel spacing. It has low insertion loss, low PDL, high isolation and good thermal stability.
Coarse Wavelength Division Multiplexers (CWDM Series ), Filter Component
Coarse Wavelength Division Multiplexers (CWDM Series ), Filter Component
The Coarse Wavelength Division Multiplexer series is designed and manufactured to Telcordia standard. The devices use environmentally stable thin film filter and advanced packaging technology to achieve wide passband, low insertion loss, high channel isolation and excellent environmental stability. They can be used individually to perform single channel add or drop function or can be cascaded into sequence for multi-channel applications in CWDM systems.
PM Filter Tap Isolator
PM Filter Tap Isolator
The Polarization Maintaining Tap Isolator combines a tap coupler and polarization sensitive/insensitive isolator into a single compact package. It has high extinction ratio and very low insertion loss. The component is ideal for fiber amplifier and fiber optic system where signal monitoring is required.