+86-028-85255257
產品介紹
MPO光纖適配器的連接方式與單芯的SC光纖適配器不一樣,SC光纖適配器內部裝配了陶瓷套筒,在SC連接器插芯連接時通過該套筒進行精確對準,而MPO適配器是采用MPO連接器插芯端面上左右兩個直徑為0.7mm的導引孔與導引針(又叫PIN針)進行精準連接,因此MPO適配器沒有單多模之分,SC光纖適配器有單多模之分是因為套筒質量不一樣。MPO適配器被廣泛的應用于通信系統的基站、樓宇機房里的光纖配線架(ODF),MPO盒子、各種測試儀器上。
產品特點
好的重復性,可重復使用1000次以上
低插入損耗
高可靠性
符合RoSH要求
產品應用
儀器測試
光纖鏈路測試
MPO跳線之間的連接
有線電視網、城域網、廣域網,F(xiàn)TTX
技術參數
規 格 |
|
項 目 |
規格參數 |
適用連接器類型 |
MPO |
適配器顏色 |
黑色 |
測試波長 |
1310nm, 1550nm, 850nm, 1300nm |
插入損耗 |
典型值≤0.20dB,最大值≤0.30dB |
可重復性 |
≤0.10dB |
可互換性 |
≤0.20dB |
插拔性能 |
插拔1000次,損耗變化≤0.20dB |
適配器材質 |
塑 料(PC) |
工作溫度 |
0℃ to +70℃ |
存儲溫度 |
-40℃ to +85℃
|
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.