GYDGA 光纜的結構如下：光纖帶放入由高密度聚乙烯 (HDPE) 制成的骨架槽內，骨架中心是單根鋼絲或多股絞合鋼絲。在骨架外繞包一層阻水帶，雙面涂塑鋁帶 (APL) 縱包后擠制聚乙烯 (PE) 護套。在鋁帶與阻水帶之間放置撕裂繩以便于護套開剝。

產品應用
GYDGA 光纜具有光纖組裝密度高、抗側壓性能好、接續效率高等優點，充分滿足現代通信發展（如 FTTB、FTTH等）對施工和通信能力的要求，特別適用于中繼網和接入網。

產品特點
● 良好的結構設計和工藝控制，具有優越的光學、機械和環境性能
● 采用快速高膨脹率阻水帶，充分保證了光纜的阻水性能
● 采用無纖膏和纜膏的全干式阻水結構，克服了傳統油膏不易清除的缺點，減少了施工準備時間，極大地提高了接續效率，便于施工和維護
● 骨架式結構抗側壓性好，對光纖帶有良好的保護
● 光纖組裝密度高，光纜相對直徑小，重量輕，便于敷設
● 骨架式結構開剝后，可直接取出光纖帶，便于分歧
● 護套內放置撕裂繩，便于開剝

結構參數

注: a．Xn代表選用光纖類型，光纖色標參見光纖帶說明
b．XF代表選用光纖帶類型，如4F表示4芯帶
c．300芯以下光纜—般采用4芯或6芯帶，300芯以上光纜一般采用6芯或8芯帶。

環境特性
●   儲存 / 使用溫度：-40 ℃～ +70 ℃
●   彎曲半徑：靜態 10 倍纜徑，動態 20 倍纜徑

適用：管道、架空、直埋

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.