AFBR-821vx3Z

北億纖通專業研發生產兼容安華高AFBR-821vx3Z,Avago AFBR-821vx3Z,安華高AFBR-821vx3Z光模塊,Avago AFBR-821vx3Z光模塊,安華高AFBR-821vx3Z光纖模塊,Avago AFBR-821vx3Z光纖模塊,安華高Avago AFBR-821vx3Z光模塊,安華高Avago AFBR-821vx3Z光纖模塊，100%完美兼容安華高Avago AFBR-821vx3Z光模塊:電氣參數兼容，光學參數兼容。

The Avago AFBR-821vx3Z is a 12-channel pluggable, parallel fiber optics receiver module device that supports 12x10G bandwidth with OM3 link distance up to 300 meters. The AFBR-811vx3Z and AFBR-821vx3Z are a Tx/Rx module pair optimized for short-range parallel multi-lane data communication and interconnect applications. The high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. These MiniPOD devices can support 300m 10GBASE-SR with Avago SFP+ transceivers over OM3 fiber.

Avago's MiniPOD solution offers system designers two module package options to optimize their cable management and board layout. The AFBR-811RxyZ Tx and AFBR-821RxyZ Rx are used with round multi-lane cable assemblies for applications requiring multiple turns of the jumper cable inside the chassis. The AFBR-811FxyZ Tx and AFBR-821FxyZ Rx are used with flat ribbon cable assemblies, allowing dense tiling of the modules as the jumper cables can be thread under the dust-cap of the next module. This top mounted optical connection maximizes board layout density by eliminating board space lost to the optical connector and strain relief.

The electrical interface uses a 9×9 MEG-Array connector with 1.27 mm pitch:

The optical interface requires the user to provide a custom designed optical turn 1×12 ribbon cable PRIZM® LightTurn® connector. The thermal interface provided can accept either a user provided heat sink or Avago's general purpose clip on heat sink to maintain the module case temperature between 0°C and 70°C during continuos operation.

Features

Important Notice

Performance figures,data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.