- Contact Us：
-
+86-028-85255257
- sales@f-tone.com
兼容光模塊
標準協議光模塊
- 全國產化光模塊
- 25G~400G高速光模塊
- 200km超長距光模塊
- 5G移動通信光模塊
- SFP光模塊
- CWDM SFP
- DWDM SFP
- BIDI-SFP
- SGMII SFP
- Video SFP光模塊
- Copper SFP
- 低功耗SFP
- SFP+光模塊
- CWDM SFP+
- DWDM SFP+
- BIDI SFP+
- Tunable SFP+
- 16GFC SFP+
- 25GE SFP+
- 32GFC SFP+
- SFP28光模塊
- SFP56光模塊
- SFP-DD光模塊
- QSFP光模塊
- QSFP+ 光模塊
- QSFP28光模塊
- QSFP56光模塊
- QSFP112 400G光模塊
- QSFP224光模塊
- QSFP-DD光模塊
- QSFP-DD800光模塊
- OSFP 400Gbps
- OSFP 800G光模塊
- OSFP 1.6T光模塊
- HSFP 1.6T~12.8T光模塊
- XFP光模塊
- CWDM XFP
- DWDM XFP
- BIDI XFP
- 1x9光模塊
- CSFP光模塊
- CSFP+10G光模塊
- CXP光模塊
- CFP光模塊
- CFP2光模塊
- CFP4光模塊
- CFP8 400Gbps
- CDFP 400Gbps
- MicroQSFP光模塊
- DSFP光模塊
- FT-61光模塊
- OLT光模塊
- ONU光模塊
- PLCC光模塊
- RJ光模塊
- SFF光模塊
- SNAP12光模塊
- USOT光模塊
- X2光模塊
- Xenpak光模塊
- 光電編碼器模塊
- 光模塊測試板
- 光模塊籠子座子
- DAC 高速線纜
- 光纖滑環|光電滑環
- 光纜車
- 軍品級DIN光模塊
- 塑料光纖模塊
- 替換安華高工業電力光模塊
- 兼容國產化替換安華高光耦
- 射頻光模塊
- 微型多路光模塊
- 特種光模塊
- 特種光纖連接器
- 特種光電連接器
- USB光纖延長線
- HDMI
- 特種電連接器
- 特種光纖光纜
- 光藕
- SMA測試線纜
- OSA
- PON BOSA
- Pigtailed PD
- RFoG BOSA
- TO-CAN
- 光纖溫度傳感器
- 光纖應變傳感器
- 光纖加速度傳感器
- 光線壓力傳感器
- 光纖位移傳感器
- 光纖應力傳感器
- 光纖傳感分析儀
- 光纖分布式測溫主機
- 光纖布里淵信號解調儀
- 分布式光纖聲振信號解調儀
- Camera Link
技術支持
兼容協議光模塊
- 華為光模塊
- 思科光模塊
- 華三光模塊
- 中航光電光模塊
- 中興光模塊
- 銳捷光模塊
- 惠普光模塊
- 神州數碼光模塊
- Juniper光模塊
- Extreme光模塊
- Brocade光模塊
- D-Link光模塊
- 赫思曼光模塊
- 阿爾卡特朗訊光模塊
- Allied Telesis光模塊
- Foundry光模塊
- Force10光模塊
- Blade光模塊
- Linksys光模塊
- Marconi光模塊
- 博達光模塊
- 網件光模塊
- Nortel光模塊
- Moxa光模塊
- 海康威視HIKVISION光模塊
- McAfee光模塊
- SMC智邦光模塊
- 安華高Avago光模塊
- 飛通光模塊
- Finisar光模塊
- yellobrik SDI光模塊
- 羅克韋爾AB光模塊
- 羅杰康光模塊
- 研華Advantech光模塊
其它種類光器件
- 全國產化光器件
- 光纖陣列系列
- 高速模塊微連接
- 相干通訊光連接
- 硅光子器件光鏈接
- Bio-Medical Equipment
- Components for Fiber Laser
- Components for Fiber sensing
- Components for Optical Network
- EDFA光纖放大器
- 光纖傳感器
- High power Component
- Hybrid for EDFA
- Test Equipment & Others
- Test Equipment & Others
- 保偏光器件
- 光分路器
- 光開關
- 探測器
- 光功率計
- 全光纖相位拉伸器
- 光纖準直器
- 光衰減器系列
- 光偏振控制器
- 光源
- 光環行器Circulator
- 光纖延遲線
- 色散補償模塊
- 光纖放大器
- 無源傳輸轉換器
- 光纖激光器
- 光調制器
- 光電探測器
- 光纖偏振
- 光纖濾波器
- 同軸激光器
- 同軸電纜
- 光纖法蘭適配器
- 光纖跳線&尾纖
- SMA-特殊纖芯系列
- 特殊接頭系列
- 鎧裝系列
- 光耦合器Coupler
- 皮纖跳線系列
- 大芯數系列
- 回路跳線系列
- 保偏光纖系列
- 光通信組件
- 光隔離器isolator
- 其它光器件
- 可調濾波器
- 可調衰減器
- 拉錐耦合器
- 無源光器件
- 法拉第旋轉鏡
- 波分復用器
- 濾波器
- 蝶形激光器
- 光耦合器&分路器
- 光纖環形器&法拉第旋轉鏡
- 光纖隔離器&波分復用器
- 光纖分束器&合束器（PBS/PBC）
- 光纖光柵
- 高速線纜
AFBR-785BEPZ
Specifications
- 產品型號: AFBR-785BEPZ
- 兼容品牌: 安化高Avago
- 封裝類型: Avago AFBR-785BEPZ Twelve-Channel Receiver
- 傳輸速率: Avago AFBR-785BEPZ Twelve-Channel Receiver
- 傳輸距離: Avago AFBR-785BEPZ Twelve-Channel Receiver
- 發射波長: 850nm
- 接收波長: 850nm
- 工作溫度: 商業級0℃～+70℃/工業級-40℃～+85℃ 可選
- 數字診斷: 帶DDM/不帶DDM 可選
- 接收靈敏度: Avago AFBR-785BEPZ Twelve-Channel Receiver
- 接收靈敏度: Avago AFBR-785BEPZ Twelve-Channel Receiver
Description
AFBR-785BEPZ Twelve-Channel Transmitter and Receiver Pluggable, Parallel-Fiber-Optics Modules
Description
AFBR-785BEPZ Twelve-Channel Transmitter and Receiver Pluggable, Parallel-Fiber-Optics ModulesThe AFBR-785BEPZ Twelve-Channel, Pluggable, Parallel- Fiber-Optics Transmitter and AFBR-785BEPZ Twelve- Channel, Pluggable, Parallel-Fiber-Optics Receiver are high performance fiber optics modules for short-range parallel multi-lane data communication and interconnect applications. The modules operate at 5.0Gbps per channel over multimode fiber systems using a nominal wave- length of 850 nm. Aggregate bandwidth per transmitter- receiver link is 60G. The electrical interface uses a 10x10 MEG-Array? low-profile mezzanine connector. The optical interface uses a MTP? (MPO) 1x12 ribbon cableconnector. The thermal interface can be a factory installed heatsink for air-cooled systems or thermal seating plane for user flexibility. The modules incorporate high performance, highly reliable, short wavelength optical devices coupled with proven circuit technology to provide long life and consistentservice.
Applications
- High Performance and High Productivity computer interconnects
- InfiniBand12XDDRSXinterconnects
- Datacomswitchandrouterbackplaneconnections
- Telecomswitchandrouterbackplaneconnections
- Dense4GbpsFibreChannelcompatiblearchitectures
- Reach extensions for various protocols including PCI Express, HyperTransport and Serial RapidIO
Features
- HighChannelCapacity:60Gbpspermodule
- High port density: 19 mm lateral port pitch; < 0.51 mm/ Gbps for Tx–Rxpair
- LowpowerconsumptionperGbps:<53mW/Gb/sfor Tx–Rxpair
- Based on industry-standard, pluggable, SNAP12 form factor with upgraded pinout for improved signal integrity and keyed to prevent mis-plugging with first generation SNAP12devices
- Backed by PPOD MSA to enable multiple sources of supply
- Twelveindependentchannelspermodule
- Separate transmitter and receivermodules
- 850 nm VCSEL array in transmitter; PIN array inreceiver
- Operatesupto5.0Gbpswith8b/10bcompatiblecoded data
- Links up to 150 m at 5.0 Gbps with 2000 MHz?km 50um MMF
- Two power supplies, 2.5 V and 3.3 V, for low power consumption
- Dedicated signals for module address, module reset and hostinterrupt.
- TwoWireSerial(TWS)interfacewithmaskableinterrupt for expanded functionalityincluding:
- Individual channel functions: disable, squelch disable,lanepolarityinversion,margin
- Programmable equalization integrated with DC blockingcapsattransmitterdatainput
- Programmable receiver output swing and de- emphasislevel
- A/D readback: module temperature and supply voltages, per channel laser current and laser power, or receivedpower
- Status: per channel Tx fault, electrical (transmitter) or optical (receiver) LOS, and alarmflags
- 0 to 80 °C case temperature operating range
Transmitter Part Numbers
- With fin heat sink / no EMI nose clip AFBR-775BZ
- With fin heat sink / EMI nose clip AFBR-77BEZ
- With pin heat sink / no EMI nose clip AFBR-775BPZ
- With pin heat sink / EMI nose clip AFBR-775BEPZ
- With no heat sink / no EMI nose clip AFBR-775BHZ
- With no heat sink / with EMI nose clip AFBR-775BEHZ
Receiver Part Numbers
- With fin heat sink / no EMI nose clip AFBR-785BZ
- With fin heat sink / EMI nose clip AFBR-785BEZ
- With pin heat sink / no EMI nose clip AFBR-785BPZ
- With pin heat sink / EMI nose clip AFBR-785BEPZ
- With no heat sink / no EMI nose clip AFBR-785BHZ
- With no heat sink / with EMI nose clip AFBR-785BEHZ
Transmitter Module
The optical transmitter module (see Figure 1) incorpo- rates a 12-channel VCSEL (Vertical Cavity Surface Emitting Laser) array, a 12-channel input buffer and laser driver, di- agnostic monitors, control and bias blocks. The transmit- ter is designed for IEC-60825 and CDRH eye safety com- pliance; Class 1M out of the module. The Tx Input Buffer provides CML compatible differential inputs (presenting a nominal differential input impedance of 100 Ohms and a nominal common mode impedance to signal ground of 25 Ohms) for the high speed electrical interface that can operate over a wide common mode range without requiring DC blocking capacitors. For module control and interrogation, the control interface (LVTTL compatible) incorporates a Two Wire Serial (TWS) interface of clock and data signals and dedicated signals for host interrupt, module address setting and module reset. Diagnostic monitors for VCSEL bias, light output (LOP), temperature, both supply voltages and elapsed operating time are implemented and results are available through the TWS interface.
Over the TWS interface, the user can, for individual channels, control (flip) polarity of the differential inputs, de-activate channels, place channels into margin mode, disable the squelch function and program input equaliza- tion levels to reduce the effect of long PCB traces. A reset for the control registers is available. Serial ID information and alarm thresholds are provided. To reduce the need for polling, the TWS interface is augmented with an interrupt signal for the host.
Alarm thresholds are established for the monitored attri- butes. Flags are set and interrupts generated when the attributes are outside the thresholds. Flags are also set and interrupts generated for loss of input signal (LOS) and transmitter fault conditions. All flags are latched and will remain set even if the condition initiating the latch clears and operation resumes. All interrupts can be masked and flags are reset by reading the appropriate flag register. The optical output will squelch for loss of input signal unless squelch is disabled. Fault detection or channel deactivation through the TWS interface will disablethe
channel. Status, alarm and fault information are available via the TWS interface. The interrupt signal (selectable via the TWS interface as a pulse or static level) is provided to inform hosts of an assertion of an alarm, LOS and/or Tx fault.
Receiver Module
The optical receiver module (see Figure 2) incorporates a 12-channel PIN photodiode array, a 12-channel pre- amplifier and output buffer, diagnostic monitors, control and bias blocks. The Rx Output Buffer provides CML com- patible differential outputs for the high speed electrical interface presenting nominal single-ended output im- pedances of 50 Ohms to AC ground and 100 Ohms dif- ferentially that should be differentially terminated with 100 Ohms. DC blocking capacitors may be required. For module control and interrogation, the control interface (LVTTL compatible) incorporates a Two Wire Serial (TWS) interface of clock and data signals and dedicated signals for host interrupt, module address setting and module reset. Diagnostic monitors for optical input power, tem- perature, both supply voltages and elapsed operating time are implemented and results are available through the TWSinterface.
Over the TWS interface, the user can, for individual channels, control (flip) polarity of the differential outputs, de-activate channels, disable the squelch function, program output signal amplitude and de-emphasis and change receiver bandwidth. A reset for the control registers is available. Serial ID information and alarm thresholds are provided. To reduce the need for polling, the TWS interface is augmented with an interrupt signal for thehost.
Alarm thresholds are established for the monitored attri- butes. Flags are set and interrupts generated when the attributes are outside the thresholds. Flags are also set and interrupts generated for loss of optical input signal (LOS). All flags are latched and will remain set even if the condition initiating the latch clears and operation
resumes. All interrupts can be masked and flags are reset upon reading the appropriate flag register. The elec- trical output will squelch for loss of input signal (unless squelch is disabled) and channel de-activation through TWS interface. Status and alarm information are available via the TWS interface. The interrupt signal (selectable via the TWS interface as a pulse or static level) is provided to inform hosts of an assertion of an alarm and/orLOS.
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networksbefore they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
AFBR-775BEPZ
AFBR-775BEPZ Twelve-Channel Transmitter and Receiver Pluggable, Parallel-Fiber-Optics ModulesThe AFBR-775BEPZ Twelve-Channel, Pluggable, Parallel- Fiber-Optics Transmitter and AFBR-775BEPZ Twelve- Channel, Pluggable, Parallel-Fiber-Optics Receiver are high performance fiber optics modules for short-range parallel multi-lane data communication and interconnect applications. The modules operate at 5.0Gbps per channel over multimode fiber systems using a nominal wave- length of 850 nm. Aggregate bandwidth per transmitter- receiver link is 60G. The electrical interface uses a 10x10 MEG-Array? low-profile mezzanine connector. The optical interface uses a MTP? (MPO) 1x12 ribbon cableconnector. The thermal interface can be a factory installed heatsink for air-cooled systems or thermal seating plane for user flexibility. The modules incorporate high performance, highly reliable, short wavelength optical devices coupled with proven circuit technology to provide long life and consistentservice.
AFBR-775BHZ
AFBR-775BHZ Twelve-Channel Transmitter and Receiver Pluggable, Parallel-Fiber-Optics ModulesThe AFBR-775BHZ Twelve-Channel, Pluggable, Parallel- Fiber-Optics Transmitter and AFBR-775BHZ Twelve- Channel, Pluggable, Parallel-Fiber-Optics Receiver are high performance fiber optics modules for short-range parallel multi-lane data communication and interconnect applications. The modules operate at 5.0Gbps per channel over multimode fiber systems using a nominal wave- length of 850 nm. Aggregate bandwidth per transmitter- receiver link is 60G. The electrical interface uses a 10x10 MEG-Array? low-profile mezzanine connector. The optical interface uses a MTP? (MPO) 1x12 ribbon cableconnector. The thermal interface can be a factory installed heatsink for air-cooled systems or thermal seating plane for user flexibility. The modules incorporate high performance, highly reliable, short wavelength optical devices coupled with proven circuit technology to provide long life and consistentservice.
AFBR-775BEHZ
AFBR-775BEHZ Twelve-Channel Transmitter and Receiver Pluggable, Parallel-Fiber-Optics ModulesThe AFBR-775BEHZ Twelve-Channel, Pluggable, Parallel- Fiber-Optics Transmitter and AFBR-775BEHZ Twelve- Channel, Pluggable, Parallel-Fiber-Optics Receiver are high performance fiber optics modules for short-range parallel multi-lane data communication and interconnect applications. The modules operate at 5.0Gbps per channel over multimode fiber systems using a nominal wave- length of 850 nm. Aggregate bandwidth per transmitter- receiver link is 60G. The electrical interface uses a 10x10 MEG-Array? low-profile mezzanine connector. The optical interface uses a MTP? (MPO) 1x12 ribbon cableconnector. The thermal interface can be a factory installed heatsink for air-cooled systems or thermal seating plane for user flexibility. The modules incorporate high performance, highly reliable, short wavelength optical devices coupled with proven circuit technology to provide long life and consistentservice.
AFBR-785BZ
AFBR-785BZ Twelve-Channel Transmitter and Receiver Pluggable, Parallel-Fiber-Optics ModulesThe AFBR-785BZ Twelve-Channel, Pluggable, Parallel- Fiber-Optics Transmitter and AFBR-785BZ Twelve- Channel, Pluggable, Parallel-Fiber-Optics Receiver are high performance fiber optics modules for short-range parallel multi-lane data communication and interconnect applications. The modules operate at 5.0Gbps per channel over multimode fiber systems using a nominal wave- length of 850 nm. Aggregate bandwidth per transmitter- receiver link is 60G. The electrical interface uses a 10x10 MEG-Array? low-profile mezzanine connector. The optical interface uses a MTP? (MPO) 1x12 ribbon cableconnector. The thermal interface can be a factory installed heatsink for air-cooled systems or thermal seating plane for user flexibility. The modules incorporate high performance, highly reliable, short wavelength optical devices coupled with proven circuit technology to provide long life and consistentservice.
AFBR-785BEZ
AFBR-785BEZ Twelve-Channel Transmitter and Receiver Pluggable, Parallel-Fiber-Optics ModulesThe AFBR-785BEZ Twelve-Channel, Pluggable, Parallel- Fiber-Optics Transmitter and AFBR-785BEZ Twelve- Channel, Pluggable, Parallel-Fiber-Optics Receiver are high performance fiber optics modules for short-range parallel multi-lane data communication and interconnect applications. The modules operate at 5.0Gbps per channel over multimode fiber systems using a nominal wave- length of 850 nm. Aggregate bandwidth per transmitter- receiver link is 60G. The electrical interface uses a 10x10 MEG-Array? low-profile mezzanine connector. The optical interface uses a MTP? (MPO) 1x12 ribbon cableconnector. The thermal interface can be a factory installed heatsink for air-cooled systems or thermal seating plane for user flexibility. The modules incorporate high performance, highly reliable, short wavelength optical devices coupled with proven circuit technology to provide long life and consistentservice.
AFBR-785BPZ
AFBR-785BPZ Twelve-Channel Transmitter and Receiver Pluggable, Parallel-Fiber-Optics ModulesThe AFBR-785BPZ Twelve-Channel, Pluggable, Parallel- Fiber-Optics Transmitter and AFBR-785BPZ Twelve- Channel, Pluggable, Parallel-Fiber-Optics Receiver are high performance fiber optics modules for short-range parallel multi-lane data communication and interconnect applications. The modules operate at 5.0Gbps per channel over multimode fiber systems using a nominal wave- length of 850 nm. Aggregate bandwidth per transmitter- receiver link is 60G. The electrical interface uses a 10x10 MEG-Array? low-profile mezzanine connector. The optical interface uses a MTP? (MPO) 1x12 ribbon cableconnector. The thermal interface can be a factory installed heatsink for air-cooled systems or thermal seating plane for user flexibility. The modules incorporate high performance, highly reliable, short wavelength optical devices coupled with proven circuit technology to provide long life and consistentservice.