800G,2km,2×400G or 8×100G OSFP With Dual CS interface

Product Description
F-tone Networks’s OSFP transceiver module is designed for use in 800 Gigabit Ethernet links over 2km single mode fiber. The module has 8 independent electrical input/output channels operating up to 106.25Gbps per channel.
This transceiver consists of two transmitter/receiver units, with each operating on a set of 4 wavelengths on the ITU G.694.2 CWDM grid near 1310nm. The transmitter path of the module incorporates a bi-directional PAM4 re-timer ASIC integrated with EML Laser and two 4-channel modulator driver. On the receiver path, used 8 photodiodes and two 4-channel TIA arrays, along with the PAM4 re-timer.

Features
● 0 to 2km over SMF with KP4 FEC supported at the Host side
● Dual SMF CS connector
● Triple Rate operation:
           106.25Gbps (PAM4)
           53.125Gbps (PAM4)
           26.5625Gbps (NRZ)
● Cooled EML CWDM transmitter
● PIN and TIA array on the receiver side
● Power dissipation < 18W
● Case temperature range: 0°C to 70°C(commercial)
● Safety Certification: TUV/UL/FDA
● RoHS Compliant

Applications
● 1x800G Ethernet
● 2x400G Ethernet
● 2x200G Ethernet

本產品為FT-AM系列，僅展示部分參數，如有需要，請聯系我們。
注：本產品有全國產化型號可選
Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.