+86-028-85255257
50G 80/96-CH Gaussian Athermal AWG
產品描述/Description
F-tone Networks’s Athermal AWG series products take silica-on-silicon planar technology and it is built with high performance and reliability, which can be used in general DWDM systems. Based on the athermal design and packing, it is totally passive product which does not require any electrical power or temperature control. For 50G AAWG Mux/Demux, it supports up to 96-CH based on a single chipset. Customized wavelengths, package and fiber options are also available.
特點/Features
● 低損耗/Low Insertion Loss
● 寬工作帶寬/Wide pass band
● 高通道隔離度/High Channel Isolation
● 高穩定性和可靠性/High Stability and reliability
應用/Applications
● 波分復用網絡/WDM Network
● 電信通信/Telecommunication
● 接入網/Access Network
極限條件/Absolute Maximum Ratings
參數/Parameters |
條件/Conditions |
規格/Specifications |
單位/Unit |
|
Min. |
Max. |
|||
工作溫度/Operating Temperature |
Device Not Powered on Heater Element |
-5 |
65 |
oC |
工作濕度/Operating Humidity |
無冷凝環境/Non-Condensing Environment |
5 |
85 |
%RH |
存儲溫度/Storage Temperature |
Device Not Powered on Heater Element |
-40 |
85 |
oC |
存儲濕度/Storage Humidity |
無冷凝環境/Non-Condensing Environment |
0 |
95 |
%RH |
光學性能/Optical Specifications(高斯無熱AWG/ Gaussian Athermal AWG)
參數/Parameters |
條件/Conditions |
規格/Specifications |
單位/Unit |
||
Min. |
Typ. |
Max. |
|||
通道數/Number of Channels |
|
80/96 |
CH |
||
通道間隔/Number Channel Spacing |
|
50 |
GHz |
||
中心波長/Center Wavelength |
ITU frequency, measured in vacuum. |
C-band |
nm |
||
通道帶寬/Clear Channel Passband |
Centered at each ITU channel frequency |
± 6.25 |
GHz |
||
波長精度/Wavelength Stability |
Maximum range of the wavelength error of all channels and temperatures in average polarization. |
±0.09 |
nm |
||
-1dB帶寬/-1dB Channel Bandwidth |
Clear channel bandwidth defined by passband shape. For each Channel. |
0.25 |
|
|
nm |
-3dB帶寬/-3dB Channel Bandwidth |
Clear channel bandwidth defined by passband shape. For each channel. |
0.30 |
|
|
nm |
ITU波長通道插損/ Optical Insertion Loss at ITU grid |
Defined as the minimum transmission at ITU wavelength for all channels. For each channel, at all temperatures and polarizations with connectors. |
|
|
7.0 |
dB |
相鄰?fù)ǖ栏綦x度 Adjacent Channel Isolation |
Ratio of peak transmission to the maximum transmission over both adjacent ITU wavelengths |
20 |
|
|
dB |
非相鄰?fù)ǖ栏綦x度 Non-Adjacent, Channel Isolation |
Ratio of peak transmission in channel passband to the maximum transmission over all non-adjacent ITU wavelength |
30 |
|
|
dB |
總串?dāng)_/ Total Crosstalk |
Ratio of power in channel to power in all other ITU wavelength |
17 |
|
|
dB |
插損一致性/ Insertion Loss Uniformity |
The difference between the maximum and minimum of passband across all channels |
|
|
1.7 |
dB |
方向性/Directivity(Mux Only) |
Ratio of reflected power out of any channel(other than channel n)to power in from the input channel n |
45 |
|
|
dB |
回?fù)p/Optical Return loss |
Input & output ports |
40 |
|
|
dB |
偏振相關損耗/ Polarization Dependent Loss in Clear Channel Band |
Worst-case value measured in ± 20GHz around ITU wavelength for each port. |
|
0.3 |
0.5 |
dB |
偏振模式色散 Polarization Mode Dispersion |
Maximum differential group delay within reference ITU wavelength |
|
|
1.0 |
ps |
色度色散/Chromatic Dispersion |
Maximum change rate of group delay versus wavelength within reference ITU wavelength |
-35 |
|
+35 |
ps/nm |
最大輸入光功率 Maximum Input Optical Power |
Maximum continuous optical power |
|
|
500 |
mW |
機械尺寸, 光纖輸出和連接頭配置/Mechanical Dimensions, Fiber Coding and Connector Specifications
尺寸/Dimensions |
120 x 70 x 10 |
mm |
|||||||||||||
光纖類型/Fiber Type |
公共端/Common SMF-28e fiber with 900um loose tube/ SMF-28e 加900um松套管 通道端/Channels: SMF-28e Ribbons |
||||||||||||||
光纖長度/Fiber Length |
輸入端/Common |
1000mm ± 50mm with 900um loose tube/輸入纖長1000mm ± 50mm 900um套管 |
|||||||||||||
輸出端/Channels |
Ribbon 500mm± 20 mm and Fan out 500mm± 30mm with 900um loose tube /輸出帶纖500mm± 20 mm,加分支器纖長500mm± 30mm |
||||||||||||||
公共端/Common |
顏色/Color |
白/white |
|||||||||||||
帶纖標識/Ribbon Identification |
帶纖末端貼數碼貼標識 /Label with ribbon number will be placed close to end-points |
||||||||||||||
連接器類型/Connector Options |
輸入端/Common |
LC/UPC |
|||||||||||||
輸出端/Channels |
LC/UPC |
||||||||||||||
帶纖光纖標識/Fiber Identification in Ribbon |
1 |
藍/Blue |
2 |
橙/Orange |
3 |
綠/Green |
4 |
褐/Brown |
5 |
灰/Grey |
6 |
白/White |
|||
7 |
紅/Red |
8 |
黑/Black |
9 |
黃/Yellow |
10 |
紫/Purple |
11 |
粉/Pink |
12 |
水/Aqua |
||||
*可按客戶要求定制/Customized design available
|
訂購信息/Ordering Information
FT-13-XAWG |
X |
XX |
X |
XXX |
X |
X |
X |
XX |
XX |
Type |
Band |
Number of Channels |
Spacing |
1st Channel |
Chip Type |
Package |
Fiber Length (Total Length) |
In/Out Connector |
是否全國產 |
AAWG= Athermal AWG |
C=C-Band L=L-Band D=C+L-Band X=Customize |
16=16-CH 32=32-CH 40=40-CH 48=48-CH 96=96-CH XX=Special |
1=100G 2=200G 5=50G X=Special |
C62=C62 H61=H61 C60=C60 H59=H59 . XXX=special |
G=Gaussian F=Flat Top |
M=Module R=Rack X=Special |
1=0.5m 2=1m 3=1.5m 4=2m X=Specify |
0=None 1=FC/APC 2=FC/PC 3=SC/APC 4=SC/PC 5=LC/APC 6=LC/PC 7=ST/UPC X=Specify |
GC=全國產 空=非全國產 |
Note: Typical channel plan: ITU wavelengths 50G H13(1566.72nm)-C61(1528.77nm).
注:本產品有全國產化型號可選
本產品為FT-13系列,僅展示部分參數,如有需要,請聯系我們。
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.