The FT-BE-F8505 SFP28 transceiver is intended for 100m reach service from 24.33Gb/s 850nm multi mode high ment where low-cost, extraordinary performance and reliability are essential. It consumes low power, operates from a 3.3V DC pow -speed communications equip- er supply .It is compliant with SFF-8431. The low jitter and low bit error rate optical assembly features a 850nm VCSEL laser transmitter and PIN/TIA receiver. It incorporates the SFP+ MSA LVTTL Loss of Signal (Rx_LOS), Tx Fault (Tx_FAULT), MOD_ABS and Tx Disable (Tx_DIS) monitor and control functions. The differential AC coupled Tx and Rx data interfaces are CML compatible. The device is Class I laser safety compliant.

Features
● LC Duplex optical interface
● Reach: max up to 100m on OM4 MMF
● Bit rate:24.33Gb/s
● +3.3 V power supply
● Low DC power consumption
● 2x10 SFP28 MSA compliant package
● Hot swappable
● High performance 850 nm VCSEL laser
● High sensitivity PIN/TIA optical receiver
● Multi Mode operation
● Case Operating temperature range:
    Commercial: 0 to 70ºC
    Extended: -10 to 85ºC
● Data and Control Interfaces:
● Tx Data CML/AC Coupled
● Rx Data CML/AC Coupled
● Tx_DIS LVTTL
● Tx_FAULT LVTTL
● Rx_LOS LVTTL
● MOD_ABS LVTTL
● 2-wire I2C data bus
● RoHS compliance
● Temperature E refers to -20ºC-85ºC

注：本產品有全國產化型號可選
Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.