• Transmission data rate up to 11.2Gbit/s per channel
• CFP MSA compliant
• Compliant to IEEE 802.3ba specification for 100GBASE-SR10 links
• Up to 11.2 Gbps per channel bandwidth,
• OTU4 compatible
• 10 channels 850nm VCSEL array
• 10 channels PIN photo detector array
• OM3 Multimode Fiber cable of up to 300m and OM4 Multimode Fiber cable of up to 400m
• MDIO digital diagnostic and control capabilities.
• compliant to CFP MSA Management Interface Specification, Draft 1.4
• TX input and RX output CDR retiming
• Hot pluggable electrical interface
• Power class 1 (<8W max)
• Operating case temperature 0°C to +70°C
• 3.3V power supply
• RoHS 6 compliant(lead free)

• Transmission data rate up to 11.2Gbit/s per channel
• CFP MSA compliant
• Compliant to IEEE 802.3ba specification for 40GBASE-SR4 links
• Up to 11.2 Gbps per channel bandwidth,
• OTU3 compatible
• 4 channels 850nm VCSEL array
• 4 channels PIN photo detector array
• OM3 Multimode Fiber cable of up to 300m and OM4 Multimode Fiber cable of up to 400m
• MDIO digital diagnostic and control capabilities.
• compliant to CFP MSA Management Interface Specification, Draft 1.4
• TX input and RX output CDR retiming
• Hot pluggable electrical interface
• Power class 1 (<8W max)
• Operating case temperature 0°C to +70°C
• 3.3V power supply
• RoHS 6 compliant（lead free）

CFP 100GBASE-SR10 / OTU4 Parallel Optical Module:Designed to support the IEEE 100GBASE-SR10 link specification; the newly developed F-tone 100G CFP transceiver provides increased port density and total system cost savings. The F-tone CFP module has a single MPO port which connects to an industry standard 2x12 multi-mode fiber cable. One 2x12 multi-mode optical fiber cable terminated with MPO optical connectors connects two CFP modules.

100G CFP to QSFP28 Adapter：北億纖通100G CFP to 100G QSFP28 Adapter轉接器實現CFP接口（10X10Gbps）與QSFP28接口（4X25Gbps）雙向轉換，滿足IEEE 802.3ba 100GBASE-LR4和IEEE 802.3bm 100GBASE-SR4協議，最大功耗低于4W，支持前向糾錯編碼（FEC）、數字診斷（DDM）功能。為100G以太網和電信網提供高性能、熱插拔互聯方案。 經驗證，采用100m OM4多模光纖進行傳輸，該模塊實測功耗低于2.3W，并成功實現4小時連續工作零誤碼。

CFP4-100G-SR4：F-tone Networks’s 100Gb/s transceiver module for optical communication applications compliant to 100GBASE-SR4 of the IEEE P802.3bm standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of VCSEL optical signals over 4 multimode fibers for 100Gb/s optical transmission. Reversely, on the receiver side, the module receives 4 channels of VCSEL optical signals over 4 multimode fibers and then converts them to 4 output channels of electrical data.The high speed VCSEL transmitters and high sensitivity PIN receivers provide superior performance for 100Gigabit Ethernet applications up to 100m links over OM4 multimode fibers and compliant to optical interface with IEEE802.3bm Clause 95 100GBASE-SR4 requirements.

100G LR4 OTU4 CFP2光模塊:兼容CFP2 MSA,符合OTU4,傳輸距離可達10km,4并聯電串行接口和CML信號交流耦合,MDIO實時診斷和控制能力,TX和RX CDR再定時輸出輸入,工作溫度0°C + 70°C,3.3V電源。北億纖通專業研發生產100G LR4 OTU4 CFP2光模塊,工業級100G LR4 OTU4 CFP2光模塊,100G LR4 OTU4 CFP2,工業級100G LR4 OTU4 CFP2,是一個專業的100G LR4 OTU4 CFP2光模塊廠家,有很好的100G LR4 OTU4 CFP2光模塊價格